The Harrier™ Series (Click here for Product Options)
The best value in extruded aluminum indirect lighting. Lightweight at only 7 pounds per 8'-0" length, the HARRIER™ is fully lensed- this allows the T5 lamp to operate at optimum brightness and efficiency (nearby HVAC cold-air supply registers won't cause draft-induced lumen loss), and keeps the dust bunnies away (have you ever looked into an open indirect fixture?) - just wipe the smooth outer surface of the internally-prismed lens (which incidentally provides a nominal 10% down component to the HARRIER™'s distribution).
Minimize installation time and electrical drops, and maximize the appearance and visual comfort of a space with HARRIER™ indirect lighting.
Integral ballast heatsink…beautiful aluminum housing…snap-on inverted prism DR acrylic lens…nominal 10% downlight component…affordable price.
One-piece extruded aluminum housing with integral ballast heat-sink. Reflectors are easily removed for access to the ballast/wiring compartment. 1/2" wiring hole in each endplate. Clear anodized standard finish, anodized colors available.
HF electronic programmed start, multi-volt ballasts. Specify 120-277V or 347-480V. Dimming is available, too, line-voltage, 0-10V, even DALI. Seismic make-and-break captive rotor lamp sockets. Lamps are 85 CRI with .95 lumen maintenance over life, and are rated to 40,000 hours life at 12 hours per start. UL/CUL Damp Location Listed.
95% reflective microfritted aluminum roll-formed engineered T5 reflector. 3.125" wide impact-modified clear acrylic linear-prismed snap-on radius lens with smooth exterior face for ease of cleaning. 10% nominal downlight.
The HARRIER™ is suspended from endplate tabs with optional seismic-rated adjustable cable gripper and 1/16" nominal stainless steel cable set. Grippers install and positively lock without tool and have a withstand rating in excess of 50x the HARRIER™’s weight.
HARRIER™ 4’-0” length: 4 lbs. 7 oz.