Home

The Raptor™ Series:  RAP4    (Click Here for Product Options)

The RAP4™ is our ‘flagship’ product. Our cumulative sales of this luminaire model alone is out in the field saving an estimated 130 gigaWatts* of energy per year over the HID it has replaced! The design of the extruded aluminum housing allows no convective airflow through the fixture – meaning no cold air is pulled across the lamps (which could lower lumen output); any suspended dirt/dust in the environment won’t be pulled through either – the RAP4™, with our standard lens option, stays clean even in filthy environments. Use it for distribution centers, gymnasiums, warehouses, hangars, cold storage facilities, manufacturing and other highbay applications, in ambient temperatures from -20F (-30C) up to (using a 90C rated ballast) 150F(65C). UL/CUL Damp Location Listed.

 Housing

 It’s .060” anodized, extruded aluminum. We’ve added wings to the RAP1™ channel, to increase the radiative mass for additional thermal transfer – keeping lamp heat from damaging the sensitive electronics in the ballast via our integral ballast heat-sink. The reflector assembly is unitized for easy access to the ballast/wiring compartment without removing lamps. 1/2" conduit entry hole in each end, top feed hole option available. Clear anodized standard finish, anodized colors available.

Electrical

The RAP4™ uses 220 input Watts – 6% less than the competition. HF electronic programmed start, multi-volt ballasts. Specify 120-277V or 347-480V. Dimming is available, too, line-voltage, 0-10V, even DALI. Seismic make-and-break captive rotor lamp sockets. Lamps are 85 CRI with .95 lumen maintenance over life, and are rated to 40,000 hours life at 12 hours per start.

Optics

95% reflective specular hard-anodized aluminum roll-formed engineered T5 reflector. Very uniform in the horizontal & vertical planes. Optional 0.125" clear acrylic or polycarbonate lens in captive, hinged/latched anodized aluminum door frame.

Mounting

The RAP4™ is provided with pair of QuickClips™ snap-on full-hard stainless steel mounting clips that will accept chain, cable or threaded rod, allowing suspension without penetrating the fixture body.  QuickClips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 50X the RAP4™ luminaire weight. Other mounting options are available – we can match any existing mounting means!

Fixture Weight

RAP4™ 4’-0” length: 11 lbs. 9 oz.

* 100,000 RAP4 operating at an average 6,000 hours per year, saving 220W average per unit = 132,000,000,000 Watts!

Specification Sheet

IES File

Uplight IES File