 Cutsheet
IES file
Options available for RAP4
EM Battery Ballast
Operates 1 lamp at 1/3 output (1250 lumens) for 90 minutes
[EM]
|
Dimming Ballast
10% dimming ballast replaces normal ballast for dimming function
[DM]
|
Occupancy Sensor
Mounts in end hole of RAPTOR™ models
[OS]
|
Photocell
Mounts in end hole of RAPTOR™ models
[PC]
|
| Continuous Row Mounting [CR] |
 |
RAPTOR™ Multi-lamp Lens
Clear acrylic in extruded hinged aluminum frame [LA]
Clear polycarbonate in extruded hinged aluminum frame [LP] |
 |
RAPTOR™ parabolic louver
High-efficiency minicube louver in aluminum frame
Available for RAPTORŠ 2 through 6 lamp models
[LL]
|
 |
RAPTOR™ Multi-lamp Wireguard
10 gauge galvanized steel
[WG]
|
| WIREGUARD WITH AVRYLIC LENS [WGA] |
| WIREGUARD WITH POLYCARBONATE LENS [WGP] |
 |
Heavy Duty "HD" Mounting Bracket
Fits RAPTOR 1 through 6 lamp models
Use as single point mount, or in pairs
For angled, surface, or hard-duty mounting
[HD]
|
 |
RAPTORŠ Power Feed Stem Kit
Includes Erikson union fitting. For 3/8" stem
[PFS]
Not for use with uplight models |
 |
RAPTOR™ Power Feed Hook Kit
Hook has hole for cord & plug compatability
[PFH]
|
 |
Cordset
6'-0" 16/3 SO cord
[CS]
|
 |
Cord Plug
NEMA plug configuration as selected
CP4 = 5-15P
CP5 = L5-15P
CP6 = L6-15P
CP7 = L7-15P
CP8 = L8-20P
[CP*]
|
 |
Flex Whip
6'-0" 3/8" flex conduit with 16/3 conductor fill
[FW]
|
|
Features
A small profile enclosed T5 HO flourescent commercial/industrial luminaire robustly designed for maximum performance with minimum energy use in a broad range of applications, from task lighting to HID highbay replacement. With a near tool-less design the RAPTOR™ is ready to install right out of the box - even the lamps come pre-installed. Multi-volt ballasts take the guesswork out of what to stock. Rated at 93 L/W (54 watt lamp), this product offers outstanding savings on installation and maintenance labor costs. UL listed.
Housing
Three-piece extruded aluminum housing with integral ballast heat-sink. Reflectors easily removed for access to ballast/wiring compartment. 16 ga. aluminum end plates. 1/2" conduit entry hole in each endplate with closure plugs. Clear anodized standard finish, anodized colors available.
Electrical
Ballasts are CBM certified HPF electronic programmed start, 0.99 power factor, <10% THD, UL/CSA listed, Type 1, Class P, 105V-305V, 50/60Hz. Lampholders are positive-lock, captive rotor type, UL listed. Lamps are 85 CRI with .95 lumen maintenance over life.
Optics
95% reflective specular hard-anodized aluminum roll-formed engineering reflector. Optional 0.125" clear acrylic lens in captive, hinged/latched anodized aluminum door frame.
Mounting
Fixture provided with pair of Quick-clip™ snap-on full-hard stainless steel mounting clips that will accept #12 S-hook & chain or 1/4" threaded rod, as well as allow surface mounting without penetrating fixture body. Clips install and positively lock without tools and have a withstand rating in excess of 10X the luminaire weight.
Fixture Weight
RAP4: 11 lbs. 9 oz.
Shipping
Shipped assembled & pre-lamped with conduit entry plug, mounting clips and warranty/instruction sheet.
SCROLL DOWN FOR MORE OPTIONS! |
